Product Detail
PTU 15/25
Quick Overview
OFFLINE FILTER SEPARATOR
Flow Rate: 8 to 16 gph (30 to 60 l/hr)Max Inlet Pressure: 7 PSI (0.5 bar)
Filtration Rating: 3 µm (absolute), 0.8 µm (nominal)
The CJC™ Filter Separator PTU 15/25 PV Hydraulic is used for:
- Hydraulic oils
- Lube oils
- Gear oils
- Turbine lube oils
The PTU 15/25 PV is ideal for separation of water, removal of particles, and degradation products.
The filter pump draws oil from the bottom of the tank and presses it through the filter insert. From the center of the insert the oil flows down into the coalescer housing where water droplets - if any - adhere to the coalescer element. Here larger drops will form and settle in the bottom of the coalescer housing.
The filter outlet port is placed in the top of the coalescer housing. The filtered oil should be returned to the tank close to the suction pipe of the main system pump.
Note: the return point preferably should be non-pressurized. Contact us in case this is not possible.
| PTU 15/25 | |||
| Flow Rate Range | 8 to 16 gph | 30 to 60 l/hr | |
| Max Inlet Pressure | 7 psi | 0.5 bar | |
| Max Pressure Drop | 26 psi | 1.8 bar | |
| Max Oil Temperature | +176 °F | +80 °C | |
| Max Power Consumption | 0.24 hp | 0.18 kW | |
| Dirt Holding Capacity | 0.4 gal | 1.5 l | |
| Water Resevoir Capacity | 0.33 gal | 1.25 l | |
| Filtration Rating | Absolute | 3 µm | |
| Nominal | 0.8 µm | ||
Product Specifications
Related Products
