PTU2 27/27

Quick Overview


Flow Rate: 12 to 32 gph (45 to 120 l/hr)
Max Inlet Pressure: 7 PSI (0.5 bar)
Filtration Rating: 3 µm (absolute), 0.8 µm (nominal)

The CJC™ Filter Separator PTU2 27/27 Hydraulic is used for hydraulic oils, turbine lube oils, and gear oils with a specific weight lower than that of water. The PTU2 27/27 is ideal for separation of water, removal of particles, and degradation products.

The filter pump draws oil from the bottom of the tank and presses it through the filter insert. From the center of the insert the oil flows down into the coalescer housing where water droplets - if any - adhere to the coalescer element. Here larger drops will form and settle in the bottom of the coalescer housing.

The filter outlet port is placed in the top of the coalescer housing. The filtered oil should be returned to the tank close to the suction pipe of the main system pump.

Note: the return point preferably should be non-pressurized. Contact us in case this is not possible.

On the PTU with automatic water discharge, separated water is drained automatically. The discharge function can be monitored on the unit control box. The PTU models are also available with manual water discharge.

The pressure drop over the filter - and consequently the contaminant absorption of the filter insert - is monitored on the pressure gauge on the filter top.

PTU2 27/27 PV PV-E2W
Flow Rate Range 12 to 32 gph 45 to 120 l/hr 12 to 32 gph 45 to 120 l/hr
Max Inlet Pressure 7 psi 0.5 bar 7 psi 0.5 bar
Max Pressure Drop 26 psi 1.8 bar 26 psi 1.8 bar
Max Oil Temperature +176 °F +80 °C +176 °F +80 °C
Max Power Consumption 0.24 hp 0.18 kW 0.54 hp 0.4 kW
Dirt Holding Capacity 1.2 gal 4.4 l 1.2 gal 4.4 l
Water Discharge Manual Automatic
Filtration Rating Absolute 3 µm 3 µm
Nominal 0.8 µm 0.8 µm

Product Specifications