Product Detail
MG
Quick Overview
LEVEL PLUS MAGNETOSTRICTIVE LIQUID-LEVEL SENSOR
Order Length: 20 to 866 in (508 to 22000 mm)Vessel Pressure: 100 to 1000 PSI (7 to 69 bar)
The Level Plus® M-Series Model MG level transmitter satisfies the demand for a digital communication interface that offers the liquid level marketplace unsurpassed flexibility to meet most process application conditions. The Level Plus Model MG transmitter provides 3-in-1 measurement using one process opening for product level, interface level, and temperature measurements. Once the transmitter is installed and calibrated there is no requirement for scheduled maintenance or recalibration. Set it and forget it!
Level Plus Model MG transmitters are modular in design, offering you a selection of electronic housing styles, transmitter pipe styles and wetted materials. The Level Plus Model MG transmitter features a removable sensing element and can also incorporate 1, 5, or 12 temperature measurement points depending on the output. Subject to local electrical codes, the sensing element and electronics housing can be removed from the transmitter pipe without disrupting the operation of your process saving you time and money.
Outputs for the Level Plus Model MG transmitter include Modbus, FOUNDATION™ fieldbus, and DDA (a proprietary ASCII protocol). Modbus and DDA outputs are communicated via a 4-wire multi-drop power and data bus (EIA 485), whereas FOUNDATION™ fieldbus has a specified 3-wire bus. Utilizing the bus network eliminates the requirements for individual cable runs from each tank and these three data formats provide a direct interface to most types of computers and digital communication equipment. Both Modbus and FOUNDATION™ fieldbus outputs also allow a user to measure volume from a 100 point strap table with the option for temperature correction.
MG | |||
Order Length | Flexible Hose | 120 to 866 in | 3048 to 22000 mm |
Rigid Pipe | 20 to 300 in | 508 to 7620 mm | |
Sanitary Pipe | 20 to 300 in | 508 to 7620 mm | |
Output Signal/Protocol | Modbus RTU | ||
DDA | |||
FOUNDATION Fieldbus | |||
Vessel Pressure | Industrial Rigid Pipe | 1000 psi | 69 bar |
Sanitary Pipe | 435 psi | 30 bar | |
Teflon Pipe | 100 psi | 7 bar | |
Flexible Hose | 260 psi | 18 bar | |
Operating Temperature | Electronics | -40 to +160 °F | -40 to +71 °C |
Sensing Element | -40 to +257 °F | -40 to +125 °C | |
Temperature Element | -40 to +221 °F | -40 to +105 °C |